BCECE Chemistry Syllabus and Recommended Books

    BCECE Physics syllabus and recommended Books, bcece physics syllabus, Bihar Combined Entrance Competitive Examination, bcece math syllabus, bcece Mathematics syllabus and recommended books, BCECE Chemistry syllabus and recommended books, bcece chemistry syllabus, BCECE Biology Syllabus and recommended books, Bihar Combined Entrance Competitive Examination, bcece biology syllabus, BCECE Biology Syllabus and recommended books
    bcece physics syllabus

    This article is made by our expert to answer one of the popular searched results about BCECE Chemistry syllabus and recommended Books. Bihar Combined Entrance Competitive Examination (BCECE) is a state level engineering entrance examination conducted by the Bihar Combined Entrance Competitive Examination Board (BCECEB). Every year lac of Aspirants appears for the state level entrance examination of BCECE to get admission in various government and private engineering colleges spread all across The state.

    BCECE Bihar Combined Entrance Competitive Examination, BCECE Chemistry syllabus and recommended books, bcece chemistry syllabus, Bihar Combined Entrance Competitive Examination
    BCECE Bihar Combined Entrance Competitive Examination

    The BCECE Exam is conducted in two stages, namely, stage 1 (Pre) and stage 2 (Mains) for admission to the various Undergraduate courses in engineering and agriculture. Appearing candidates are advised to thoroughly go through BCECE Chemistry syllabus 2019 in order to have a complete grip on the subject and prepare for the entrance exam as per the prescribed syllabus only. Let us have a detailed look at the BCECE Chemistry syllabus.

    Some basic concepts of Chemistry

    General Introduction:  Importance and scope of chemistry. Historical approach to particulate nature of matter, laws of chemical combination, Dalton’s atomic theory; a concept of elements, atoms and molecules, Atomic and molecular masses. Mole concept and molar mass; percentage composition, empirical and molecular formula; chemical reactions, stoichiometry, and calculations based on stoichiometry.

    Structure of Atom : Discovery of electron, proton and neutron and their characteristics; atomic number, Isotopes & Isobars, Thomson’s model and its limitation, Rutherford’s model and its limitations, Bohr’s model and its limitations, concept of shells and sub-shells, dual nature of matter and light, De Broglie’s relationship, Heisenberg uncertainty principle, concept of orbitals, Quantum numbers, shapes of S.P. and D orbitals, rules, for filling electrons in orbitals Aufbau principle, Pauli exclusion principle and Hund’s rule, electronic configuration of atoms, stability of half filled and completely filled orbitals.

    Get Latest Info. About this Story/Article, via SMS & Email.

    Classification of Elements and Periodicity in Properties: Significance of classification, a brief history of the development of periodic table, modern periodic law and the present form of periodic table, periodic trends in properties of elements – atomic radii, ionic radii, ionization enthalpy, electron gain enthalpy, electronegativity, valence.

    Chemical Bonding and Molecular Structure : Valence electrons, ionic bond, covalent bond, bond parameters, Lewis structure, polar character of covalent bond, Covalent characters of Ionic bond, valence bond theory, resonance, geometry of covalent molecules, VSEPR theory, concept of hybridization involving s, p and d orbitals and shapes of some simple molecules, molecular orbital, theory of homonuclear diatomic molecules (qualitative idea only). Hydrogen bonding.

    States of Matter

    gases and liquids: Three states of matter, Inter-molecular interactions, type of bonding, melting and boiling points. Role of gas laws in elucidating the concept of the molecule, Boyle’s law, Charle’s law, Gay Lussac’s law Avogadro’s law, Ideal behaviour, empirical derivation of a gas equation. Avogadro’s number. Ideal gas equation. Derivation from ideal behaviour, liquefaction of gases, critical temperature.

    Liquid State – Vapour pressure, viscosity and surface tension (qualitative idea only, no mathematical derivations).


    Concepts of system, types of systems, surroundings, work, heat, energy, extensive and intensive properties, state functions, First law of thermodynamics – internal energy and enthalpy, heat capacity and specific heat, measurement of ?U and ?H, Hess’s law of constant heat summation enthalpy of : bond dissociation, combustion, formation, atomization, Sublimation, phase transformation, ionization and solution. Introduction of entropy as a state function, free energy change for a spontaneous and non-spontaneous process, criteria for equilibrium.


    Equilibrium in physical and chemical processes dynamic nature of equilibrium, a law of mass action, an equilibrium constant, factors affecting equilibrium-Le Chatelier’s principle; ionic equilibrium – ionization of acids and bases, strong and weak electrolytes, a degree of ionization, a concept of pH. Hydrolysis of salts (elementary idea), buffer solutions, solubility product, common ion effect (with illustrative examples).

    Redox Reactions

    The concept of oxidation and reduction, redox reactions, oxidation number, balancing redox reactions, applications of redox reactions.


    Position of hydrogen in periodic table, occurrence, isotopes, preparation, properties and uses of hydrogen; hydrides- ionic, covalent and interstitial; physical and chemical properties of water, heavy water; hydrogen peroxide-preparation, reactions, and structure; hydrogen as a fuel.

    s-Block Elements (Alkali and Alkaline earth metals)

    Group 1 and Group 2 elements: General introduction, electronic configuration, occurrence, anomalous properties of the first element of each group, diagonal relationship, trends in the variation of properties (such as ionization enthalpy, atomic and ionic radii) trends in chemical reactivity with oxygen, water, hydrogen, and halogens; uses.

    Preparation and properties of some important compounds: Sodium carbonate, sodium chloride, sodium hydroxide and sodium hydrogen carbonate, biological importance of sodium and potassium.CaO, CaCO3 and industrial use, lime and limestone. The biological importance of Mg and Ca.

    Some p-Block Elements

    General Introduction p-Block Elements

    Group 3 elements: General introduction, electronic configuration, occurrence, Variation of properties, oxidation states, trends in chemical reactivity, anomalous properties of the first element of the group; Boron-physical and chemical properties, some important compounds: borax, boric acids, boron hydrides. Aluminium: uses, reactions with acids and alkalies.

    Group 4 elements: General introduction, electronic configuration, occurrence, a variation of properties, oxidation states, trends in chemical reactivity, an anomalous behaviour of the first element, Carbon – catenation, allotropic forms, physical and chemical properties; uses of some important compounds: oxides. Important compounds of Silicon and a few uses: Silicon tetrachloride, silicones, silicates, and zeolite. (Part-I)

    Organic Chemistry – Some Basic Principles and Techniques

    General introduction, methods of qualitative and quantitative analysis, classification and IUPAC nomenclature of organic compounds. Electronic displacements in a covalent bond; the inductive effect, electromeric effect, resonance, and hyperconjugation. Hemolytic and heterolytic fission of a covalent bond: free radicals, carbocations, carbanions; electrophiles and nucleophiles, types of organic reactions.


    Classification of hydrocarbons :

    Alkanes – Nomenclature, isomerism, conformations (ethane only), methods of preparation, physical properties, chemical reactions including halogenation, free radical mechanism, combustion, and pyrolysis.

    Alkenes – Nomenclature, the structure of double bond (ethane), geometrical isomerism, methods of preparation, physical properties, chemical reaction: addition of hydrogen, halogen, water, hydrogen halides (Markovnikov’s addition and peroxide effect), ozonolysis, oxidation, mechanism of electrophilic addition.

    Alkynes – Nomenclature, a structure of triple bond (ethyne), methods of preparation, physical properties, chemical reactions; an acidic character of alkynes, addition reactions of hydrogen, halogen, hydrogen halides and water.

    Aromatic hydrocarbons – Introduction, IUPAC nomenclature, Benzene: resonance, aromaticity: methods of preparation, chemical properties.

    Mechanism of electrophilic substitution – nitration, sulphonation, halogenation, Friedel Craft’s alkylation and acylation; directive influence of functional group in mono-substituted benzene; carcinogenicity and toxicity.

    Environmental Chemistry

    Air, water and soil pollution, chemical reactions in atmosphere smogs, major atmospheric pollutants : acid rain, ozone and its reactions, effects of depletion of ozone layer, greenhouse effect and global warming – pollution due to industrial wastes, green chemistry as an alternative tool for reducing pollution, strategy for control of environmental pollution.

    Solid State

    Classification of solids based on different binding forces : molecular, ionic covalent and metallic solids, amorphous and crystalline solids (elementary idea), unit cell in two dimensional and three dimensional lattices, calculation of density of unit cell, packing in solids, voids, number of atoms per unit cell in a cubic unit cell, point defects, electrical and magnetic properties.


    Types of solutions, expression of concentration of solutions of solids in liquids, a solubility of gases in liquids, solid solutions, colligative properties– the relative lowering of vapor pressure, elevation of Boiling Point, depression of freezing point, osmotic pressure, determination of molecular masses using colligative properties, abnormal molecular mass.


    Redox reactions, conductance in electrolytic solutions, specific and molar conductivity variations of conductivity with concentration, Kohlrausch’s law, electrolysis and laws of electrolysis (elementary idea), dry cell-electrolytic cells and Galvanic cells; lead accumulator, EMF of a cell, standard electrode potential, Nernst equation and its application to chemical cells, fuel cells; corrosion.

    Chemical Kinetics

    Rate of a reaction (average and instantaneous), factors affecting rates of reaction; concentration, temperature, catalyst; order and molecularity of a reaction; rate law and specific rate constant, integrated rate equations and half life (only for zero and first order reactions); concept of collision theory (elementary idea, no mathematical treatment)

    Surface Chemistry

    Adsorption – physisorption and chemisorption; factors affecting adsorption of gases on solids; catalysis: homogenous and heterogeneous, activity and selectivity: enzyme catalysis; colloidal state: distinction between true solutions, colloids and suspensions; lyophilic, lyophobic, multimolecular and macromolecular colloids: properties of colloids; Tyndall effect, Brownian movement, electrophoresis, coagulation; emulsion – types of emulsions.

    General Principles and Processes of Isolation of Elements

    Principles and methods of extraction – concentration, oxidation, reduction electrolytic method, and refining; occurrence and principles of extraction of aluminium, copper, zinc, and Iron.

    p-Block Elements

    Group – 5 elements : General introduction, electronic configuration, occurrence, oxidation states, trends in physical and chemical properties; nitrogen – preparation, properties and uses; compounds of nitrogen: preparation, properties and uses; compounds of nitrogen: preparation and properties of ammonia and nitric acid, oxides of nitrogen (structure only); Phosphorous-allotropic forms; compounds of phosphorous: preparation and properties of phosphine, halides (PCl3, PCl5) and oxoacids (elementary idea only).

    Group – 6 elements : General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; dioxygen: preparation, properties and uses; simple oxides; Ozone, Sulphur-allotropic forms; compounds of sulphur: preparation, properties and uses of sulphur dioxide; sulphuric acid: industrial process of manufacture, properties and uses, oxoacids of sulphur (structures only).

    Group – 7 elements: General introduction, electronic configuration, oxidation states, occurrence, trends in physical and chemical properties; compounds of halogens; preparation, properties and uses of chlorine and hydrochloric acid, interhalogen compounds, oxoacids of halogens (structures only).

    Group – 8 elements: General introduction, electronic configuration. Occurrence, trends in physical and chemical properties, uses. (Part-II)

    d- and f- Block Elements

    General introduction, electronic configuration, occurrence and characteristics of transition metals, general trends in properties of the first-row transition metals – metallic character, ionization enthalpy, oxidation states, ionic radii, colour, catalytic property, magnetic properties, interstitial compounds, alloy formation. Preparation and properties of K2Cr2O7 and KMnO4.

    Lanthanoids – electronic configuration, oxidation states, chemical reactivity and lanthanoid contraction.

    Actinoids – Electronic configuration, oxidation states.

    Coordination Compounds

    Coordination Compounds – Introduction, ligands, coordination number, colour, magnetic properties and shapes, IUPAC nomenclature of mononuclear coordination compounds, bonding; isomerism, the importance of coordination compounds (in qualitative analysis, extraction of metals and biological systems).

    Haloalkanes and Haloarenes

    • Haloalkanes: Nomenclature, nature of the C-X bond, physical and chemical properties, mechanism of substitution reactions.
    • Haloarenes: Nature of C-X bond, substitution reactions (directive influence of halogen for monosubstituted compounds only) Uses and environmental effects of – dichloromethane, trichloromethane, tetrachloromethane, iodoform, freons, DDT.

    Alcohols, Phenols, and Ethers

    • Alcohols: Nomenclature, methods of preparation, physical and chemical properties (of primary alcohols only); identification of primary, secondary and tertiary alcohols; mechanism of dehydration, uses of methanol and ethanol.
    • Phenols: Nomenclature, methods of preparation, physical and chemical properties, acidic nature of phenol, electrophilic substitution reactions, uses of phenols.
    • Ethers: Nomenclature, methods of preparation, physical and chemical properties, uses.

    Aldehydes, Ketones and Carboxylic acids

    • Aldehydes and Ketones: Nomenclature, nature of carbonyl group, methods of preparation, physical and chemical properties mechanism of nucleophilic addition, the reactivity of alpha hydrogen in aldehydes; uses.
    • Carboxylic Acids: Nomenclature, acidic nature, methods of preparation, physical and chemical properties; uses.

    Organic compounds containing Nitrogen

    • Amines: Nomenclature, classification, structure, methods of preparation, physical and chemical properties, uses, identification of primary, secondary and tertiary amines.
    • Cyanides and Isocyanides – will be mentioned at relevant places in context.
    • Diazonium salts: Preparation, chemical reactions, and importance in synthetic organic chemistry.


    • Carbohydrates – Classification (aldoses and ketoses), monosaccahrides (glucose and fructose), oligosaccharides (sucrose, lactose, maltose), polysaccharides (starch, cellulose, glycogen); importance.
    • Proteins – Elementary idea of a – amino acids, peptide bond, polypeptides proteins, primary structure, secondary structure, tertiary structure and quaternary structure (qualitative idea only), denaturation of proteins; enzymes.
    • Vitamins – Classification and functions.
    • Nucleic Acids: DNA & RNA.


    Classification – natural and synthetic, methods of polymerization (addition and condensation), copolymerization. Some important polymers: natural and synthetic like polythene, nylon, polyesters, bakelite, rubber.

    Chemistry in Everyday life:

    Chemicals in medicines – analgesics, tranquillizers, antiseptics, disinfectants, antimicrobials, antifertility drugs, antibiotics, antacids, antihistamines. Chemicals in food – preservatives, artificial sweetening agents. Cleansing agents – soaps and detergents, cleansing action.

    Chemistry Books recommended for  2019

    Like physics, before you go to solve any problems based on chemistry the very first thing you have to do is to go thoroughly through the NCERT class 11th and 12th chemistry textbooks. Once you have completed the context and exercise problems, you will have a basic idea about what and how to study in chemistry. After you develop a sound fundamental concept of basics of chemistry, you are free to choose any of the best available chemistry books to go deeper with numerical and Chemical Reactions. Some of the best books you can have for Chemistry are as follows.

    • Numerical Chemistry by P. Bahadur
    • Arihant Organic Chemistry (Arihant Publications)

    Important links

    Aspirant before going BCECE 2019 exam, candidates must check the most important links regarding all the information of BCECE 2019 exam.

    Subject Description
    BCECE 2019 Major Notification Click Here
    BCECE 2019 Admit Card Click Here
    BCECE 2019 Eligibility Criteria Click Here
    BCECE 2019 Syllabus & Study Materials Click Here
    BCECE 2019 Cutoff: Get Latest and Previous Year Cutoff Click Here
    BCECE 2019 Recommended books Books Click Here
    BCECE 2019 Previous Year Papers Click Here
    BCECE Biology Syllabus & Recommended Books Click Here
    BCECE Mathematics Syllabus & Recommended Books Click Here
    BCECE Chemistry Syllabus & Recommended Books Click Here
    BCECE Physics Syllabus & Recommended Books Click Here

    For any Query related to BCECE 2019 notification, comment on the comment box mentioned below. Our expert will help you to make the Best preparation Strategy for the exam.

    Best of Luck…!!

    Review Date
    Reviewed Item
    BCECE Chemistry syllabus and recommended books
    Author Rating
    Disclaimer: If you have found any inappropriate or wrong information/data on the site, inform us by emailing us at mail[@]edufever.com for rectification/deletion/updating of the same.


    Please enter your comment!
    Please enter your name here